Also for use in confined environments where engine fumes are not acceptable, such as office blocks, enclosed warehouses etc, we have a range of 3 phase electric saws that can achieve cutting depths of up to 500mm.

Track Sawing:  Track saws powered by electric, hydraulic or air motors can be used in any environment and once set up can even continue working in tidal situations with remote controlled operation.

Saws generally have a blade capacity capable of giving cutting depths of 500mm but can be set up to achieve 800mm cutting depths.

Floor Sawing: Floor saws with blade diameters from 300mm to 1500mm allow cutting of reinforced concrete and asphalt roads and floor slabs up to a maximum depth of 650mm.
 
Engine driven saws up to 72hp are available for fast accurate cutting in outside or well ventilated areas.

 
We have often used a number of machines simultaneously to increase output on contracts where there are time restraints, such as carriageway works in a lane rental situation or airports and railway works where there are usually very limited working times.

Primarily used in situations where wall saws and floor saws cannot gain access or for one off window and door openings.

Ring Sawing / Chain Sawing:  The 350mm diameter ring blade that is used on this machine will give a maximum cutting depth of 250mm which allows precise square corner cutting of openings without overcuts.

In situations where a deeper cut is being achieved either by track sawing or floor sawing we have a range of diamond chain saws which can also be used to form precise corners without the need to over-cut.

All of these machines are hydraulically driven and are run by either a petrol, diesel or 3- phase electric power pack.